الخط الساخن+86 400-008-5786واتسابتيليجرامالبريد

NEZHA MAKER / مجموعة الإضاءة / حجر وجبس / لوح قمري للسقف من الجبس 600 × 600

لوح قمري للسقف من الجبس 600 × 600

صور تفصيلية

المواصفات

الأبعاد600 × 600 × 135 mm
فتحة التركيب605 × 605 mm
قطر التموج480 mm
الضوء75/95 mm module
درجة حرارة اللون3000 K / 4000 K / 6000 K (dual-colour on request)
المادةCast gypsum plaster
التشطيبMatt white, paintable
التغليف0.0788 CBM / 3.82 kg
الحد الأدنى1
مدة التنفيذ20 يومًا

التحميلات

—

حجر وجبس · سقف

لوح قمري للسقف من الجبس 600 × 600

لوح سقف مربع من الجبس مع حلقات متحدة المركز بقطر تموج 480 مم، 600 × 600 × 135 مم، فتحة 605 × 605 مم، وحدة 75/95 مم.

حسب الطلبجبس2 سنوات ضمانIP20

حسب المقاس

التكوين الحالي

600 × 135 mm · 1 إضاءة · 75/95 mm module · MOQ 1 · 20 يومًا — كل رقم أدناه قابل لإعادة الرسم.

يُصنع هذا الموديل حسب الطلب ولا يُسحب من المخزون. يمكن تغيير المقاس وعدد الإضاءات والمادة والتشطيب والجهد؛ الصور تعرض تكوينًا واحدًا.

  • القطر والارتفاع
  • عدد الإضاءات
  • لون المرمر
  • تشطيب النحاس
  • الجهد والتحكم
اطلب نسخة حسب الطلب →

أخبرنا بالمقاس والكمية والوجهة — نرد بالجدوى والمخطط ومدة التنفيذ.

تفاصيل تهم

A 600 × 600 mm cast-plaster panel, with concentric ripple rings, ripple diameter 480 mm cast into the face; it sits flush in the board and the flange is filled and painted into the ceiling, so no frame line shows.

  1. 01

    Panel and cut-out

    Cut the ceiling or soffit at 605 × 605 mm; the plaster flange laps the opening by about 5 mm all round and is filled and painted with the surrounding board.

  2. 02

    Ripple pattern

    Concentric rings are cast to 480 mm outer diameter on a 600 mm panel, so the ripple stops short of the edge and the border stays flat for filling.

  3. 03

    Light and service

    The panel takes the 75/95 mm module; the driver is remote and the light engine is reached from below without removing the panel.

لوح قمري للسقف من الجبس 600 × 600 · NEZHA MAKER ®