NEZHA MAKER / Lighting collection / Stone & Plaster / Plaster ceiling downlight 80 / 80
Detail views
Specifications
| Dimensions | 80 x 80 x 50 mm |
|---|---|
| Material | Cast gypsum plaster |
| Finish | Matt gypsum, paintable |
| Installation | Cut-out 85 x 85 mm |
| Light · Socket | GU10 |
| Packing | 0.0026 CBM / 0.15 kg |
| MOQ | 1 |
| Base lead time | 20 days |
Downloads
—
Stone & Plaster · Ceiling
Plaster ceiling downlight 80 / 80
Recessed rectangular trim, cut-out 85 x 85 mm, GU10.
Made to measure
80 × 50 mm · 1 head · GU10 · MOQ 1 · 20 days — Every figure below can be changed.
This model is produced to order, not pulled from stock. Size, head count, material, finish and voltage can all be changed; the photos show one configuration.
- Diameter & drop
- Head count
- Alabaster tone
- Brass finish
- Voltage & control
Tell us the size, quantity and destination — we reply with feasibility, a drawing and the lead time.
Details that matter
A 80 x 80 mm, 50 mm deep cast-plaster ceiling body that sits flush in the board, with a thin flange that is filled and painted into the ceiling.
- 01
Cut-out and flush trim
Cut the ceiling or soffit at 85 x 85 mm; the plaster flange laps the opening by about 5 mm all round and is filled and painted with the surrounding board, so no frame line shows.
- 02
Lamp and service
GU10 behind the opening. The lamp drops out from below and the holder sits on a spring clip, so re-lamping never touches the plaster joint.